AUDIO INNOVATE innobender

Innofader content:
-One Innofader
-One Fader Cap (black with red stripe)
-Small keychain mini philips + slothead screwdriver
-Two M3 6mm insulated flathead mounting screws
-Two M3 8mm flathead mounting screws
-Twelve M3 0.5mm self-adhesive fiberboard height adjustment washers
-One misc. adapter PC board with 8 adapters, with on-board calibration circuit
-One Ecler Eternal adapter PC board, with on-board test circuit for checking Innofader compatibility
-Two twist ties for securing adapter PC boards
-Line fader adapter kit (power cable, Innofader cable, and mini line fader PC board)
-Allen & Heath / Stanton mounting plate
-One small bottle Caig Lube with a mini tube for easy application

INNOFADER features:

No bleed/cracking:
Even the best conductive plastic (CP) or carbonized conductive plastic (CCP) contact faders will eventually bleed and require cleaning. Since the InnoFader is non-contact, no cleaning is required.

Sturdy design - 8mm stem, long body type:
Many DJs have experienced issues with bent or broken 4mm fader stems, thus the InnoFader adopts the emerging standard 8mm stem, ensuring almost no chance of breaking the stem. The long body type ensure a rigid construction which when combined with the heavy stem ensures a solid and long lasting crossfader.

No calibration required
The InnoFader is designed to automatically compensate for circuit tolerances to the point that no calibration is required to adjust for the <0.5mm tolerance on fader cut-in position.

Ultra wide range tension adjustment
At the lightest setting, the InnoFader can move with the slightest tap. On the other extreme, the InnoFader requires a steady push to move it. DJs can adjust the InnoFader to any tension setting depending on mixing style.

Adjustable curve
Analog VCA faders have fixed A, B, or D-type curves. The InnoFader has an output curve adjustment to fit any of these configurations. In addition to fitting these configurations, the InnoFader can be set for full cutting at the top or bottom.

Single cut-in adjustment for both sides
This ensures that the InnoFader can work in any sized fader slot. Since the adjustment is electronic, the actual active fader area can be shortened, unlike others which have a fixed active fader area. This often requires adjusting the mixer to fit the fader, while the InnoFader can be electronically adjusted to fit the mixer.

Not affected by dust, smoke, temperature, moisture
One main drawback of optical faders is that they stop working once there is internal dirt buildup. The InnoFader´s electronic signals are unaffected by environmental factors experienced in harsh DJ environments.