RANE serato sl2

The Rane SL 2 gives you the freedom to take your entire digital music collection on the road with advanced features that add extra creativity to your DJing. This intuitive system replicates the traditional DJing experience for "real feel" usability. Low latency means the response time from touching the decks to hearing an audio signal is extremely fast. Serato engineers developed system level audio drivers that allow accurate and reliable operation at faster speeds than any other similar package.

The Rane SL 2 USB interface connects one or two standard vinyl or CD turntables to your computer using a single USB cable and audio connections to line inputs on your DJ mixer.

WHAT IS THE RANE SL 2?

The Rane SL 2 for Serato Scratch Live is a compact, professional two-deck interface packed with creative features to give DJs a competitive edge.

Boasting high quality 48 kHz, 24-bit audio, the Rane SL 2 outputs a warm, punchy sound that you have to hear to believe.

With high speed USB 2.0 connection, ASIO and Core Audio drivers, and galvanic isolation to ensure interference-free signal; the Rane SL 2 packs a massive punch.

Features
- Inputs for two deck mixing on turntables or CD decks.
- Two software-switchable analog Thru connections for regular vinyl or CD.
- Studio-grade phono preamps, and 48kHz 24-bit audio processing for superior sound quality.
- Advanced, low latency USB 2.0 drivers
- Built-in galvanic isolation to eliminate computer noise and interference.
- Compact and ultra rugged hardware for portability and simple setup.
- ASIO and Core Audio Drivers for studio production with third-party software.
- Bus power from USB port or with optional external power supply*

SPECIFICATIONS SL 2

- Codec : 24-bit PCM
- 44.1 kHz Sample Rate Frequency Response : -0.5 dB @ 20 Hz, -1.22 dB @ 20 kHz
- 48 kHz Sample Rate Frequency Response : -0.5 dB @ 20 Hz, -0.40 dB @ 20 kHz
- Sample Rate Selection : 44.1 / 48 kHz selected in software control panel
- Deck Inputs : Unbalanced RCA with CD / Phono switch
……Phono Maximum Input 70 mV rms @ 1 kHz
……Phono Gain 33 dB at 1.0 kHz
……Line Level (CD) Maximum Input 3 Vrms
- Line Outputs: Unbalanced RCA
…...THD+N 0.007% @ 1 kHz
…...Maximum Output 3 Vrms
…...Dynamic Range 101 dB A-weighted analog in to analog out
- Dynamic Range DAC : 104.5 dB A-weighted
- Device Latency : 1.4 ms @ 44.1 kHz and 1.3 ms @ 48 kHz
- USB 2.0 High Speed Port Required : 3-unit load (300 mA max)
- Blue Indicator : Flashing while device is booting
........ Lit when USB 2.0 connection is detected
- Yellow Indicator : Lit when the analog section is powered on
- Optional RS5 External Universal Power Pack 7.5 Volts DC, P6 barrel plug
- Power: Turn On/Off Muting Yes
…...Galvanic Isolation: Audio I/O is actively isolated from USB port and external power
…...Auto-selects USB or external power without interruption
- SL 2 Unit: Size 5.5 x 5 x 1.3 (14.1 x 12.5 x 3.3 cm)
- Shipping: Size 14 x 14 x 4 (36 x 36 x 10 cm)
……Weight 5 pounds (2 kg)

Continuous control signal on vinyl allows smooth accurate scratching. Scratch Live has the lowest latency vinyl emulation system on the market. It has advanced vinyl groove and stylus modeling algorithm for a sound indistinguishable from the real thing.

Innovative positioning system allows fast and accurate needle dropping. The record has thin marks every minute, and a thicker mark every 5 minutes (played at 33 RPM). These marks assist you when using needle dropping to move through the track.

The Vinyl Scroll track allows you use your turntable or CD to scroll through your crate and pick the next song without touching your laptop.

Two copies of black vinyl are included with the SL 2. Side A: 10 minutes plus Vinyl Scroll track. Side B: 15 minutes.

The Rane SL 2 is only sold as part of a complete package. The display box includes:
- 1 SL 2 Interface
- 1 Serato Scratch Live Software Install Disc.
- 1 USB Cable
- 4 Stereo RCA Cables
- 2 Control CDs
- 2 Control Vinyl Records
- 4 Rubber Feet for the SL 2
- 1 Quick Start Guide
- 1 Operators Manual
- 1 Warranty Card