ART pro mpa ii

Features:

- Variable Input Impedance For Flexible Microphone Voicing (150 Ohms To 2400 Ohms)
- Selectable Plate Voltage
- Large VU Meters
- Backlit Function Switches
- Discrete Class-A Input Microphone Preamplifier
- Low Noise at Lower Gain Settings
- Extremely Low Total Harmonic Distortion (THD)
- Wide Frequency Response
- Additional Front Mounted Instrument Input Jack
- Supports Mid/Side Miking Technique
- Operates at +4dbm/-10dbv Output
- Selectable Stereo/Dual Operation of Output Controls
- Automatic Instrument Input Selection

Specifications:

- Frequency Response 15Hz to 48 kHz (+0, -1dB) @ normal plate voltage
- 15Hz to 120 kHz (+0, -1dB) @ high plate voltage
- Dynamic range: >110dB ("A" weighted)
- CMRR: >90dB
- THD: <0.005% (typical)
- Equivalent Input Noise: -129dBu (XLR, "A" weighted)
- Maximum Input Level: +19dBu (cannon)
- Maximum Instrument Input: +17dBu
- Input Impedance: 150-3000 Ohms adjustable (XLR) >800K Ohms (Instrument)
- Maximum Output Level: +27dBu (XLR)
- Output Impedance:: < 47 Ohms (XLR)
- Maximum Gain: 75dB
- Meter Calibration: 0 VU = +4dBu output (+4dB mode)
- 0 VU = -10dBV output (-10dB mode)
- High Pass Filter: single pole, 10-200 Hz adjustable
- Power Requirements: USA – 105 to 125 VAC / 60 Hz Export units configured for country of destination
- Dimensions: (HxWxD in) 3.50 x 19.0 x 8.75
- Dimensions: (HxWxD mm) 88 x 482x 222
- Weight: (lb/kg) 10.5 / 4.7