Of course TotalMix, the unsurpassed flexible routing mixer and SteadyClock, RME's sensational clock section with maximum jitter suppression of external clock signals, are on board too. HDSPe AIO also supports the optional TCO for synchronization to timecode (LTC/video). All this combines into a professional 'soundcard' that the world has not seen before

Connectivity:

- 1 x Analog I/O (192 kHz)

- 1 x ADAT I/O (up to 192 kHz via S/MUX4)

- 1 x SPDIF I/O (192 kHz)

- 1 x AES/EBU I/O (192 kHz)

- 1 x MIDI I/O

- 1 x Phones Output (separate DAC, 192 kHz)

- TotalMix

- optional: HDSP TCO

- optional: Expansion Boards

The HDSPe AIO ships in a basic version with analog RCA/phono breakout cables (headphone: TRS jack). Therefore all analog I/Os are unbalanced. Aan analog XLR breakout cable is available as option (headphone: Neutrik TRS locking jack), turning analog into balanced mode
(BO9632XLRMKH)

Just click on the hammer symbol in the systray of the taskbar and the settings dialog of the HDSPe AIO comes up.
The clear structured, easy to understand window plus the unique informative status windows for input signal, clock mode and sample rate make your work with the card to a real pleasure

When working with several digital sources it is not only necessary to know if these are properly locked, but also if they are totally synchronized. RME's exclusive SyncChekchecks all input signals and displays their actual state, and thanks to RME's Intelligent Clock Control (ICC) concept you have all clocks and states under control - with ease.

Tech Specs:

- 1-Lane PCI Express Endpoint device (no PCI Express to PCI Bridge)
- 2.5 Gbps line speed
- Packet-based full-duplex communication (up to 500 MB/s transfer rate)
- Supported sample frequencies: Internally 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz. Externally 28 kHz - 200 kHz
- 8 buffer sizes/latencies available: 0.7 ms, 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms
- All settings changeable in realtime
- Automatic and intelligent master/slave clock control
- Enhanced Mixed mode: All inputs and outputs simultaneously operational
- TMS (Track Marker Support): Supports CD/DAT start-IDs and the read out of CD subcode
- Unique status windows for record and playback, showing mode and sample rate
- DIGICheck, RMEs unique metering and analysing tool
- Digital inputs and outputs ground-free transformer coupled
- 3-stage hardware level control for analog inputs and outputs
- Servo-balanced analog input and output, DC-coupled signal path
- 192 kHz / 24-bit converters. SNR 112 dB RMS unweighted, 115 dBA
- Maximum input and output level (0 dBFS @ HiGain): +19 dBu
- Low impedance headphone output (75 ohm), separate DAC and playback device
- Super low jitter design: < 1 ns in all clock modes