Jbl Pro - Jrx 125 : speakers > passive speakers

Free shipping (France, Belgium)

JRX100 delivers the performance and prestige JBL is known for at an affordable price point. To meet these conflicting design goals, we looked at every element of the speaker system design. We kept everything that makes a speaker perform and sound its best and we eliminated things that don't. With performance, value and popular price points, we are going to be building a lot of JRX100 speakers. This means we can apply efficient, high-volume production methods and purchase materials at the lowest cost. That's how JRX100 delivers unprecedented value.

(sold by one)

	Progressive Transition™ Waveguide: Just one example of JBL's innovation is the PT™ Waveguide design. For decades, horn designers were faced with trade-offs between well controlled coverage, low distortion, and good frequency response. JBL developed proprietary algorithms which give our PT Waveguides the best performance in all three areas.

	Hardware: JRX100 doesn't scrimp on the hardware either. All the JRX models use tough, non-resonant all-steel handles with big, beefy bars. And the entire baffle (not just the woofer) is protected by an 18 gauge steel grille.

	JBL Drivers: All woofers and compression drivers used in JRX100 are manufactured in Northridge, California by JBL Professional.

	Enclosure Construction: Competitive systems typically use particle board construction and rely entirely on glue to hold it together. For JRX100, we selected a more rugged and acoustically superior 3/4" MDF material for the enclosures. And to make sure they stay together, we constructed them with advanced adhesives and closely spaced mechanical fasteners. Not only are the cabinets rugged, but the denser enclosure walls are more riged, delivering better low end as a result

	SonicGuard™: Feedback, dropped microphones, pushing the amps into clipping - all these things can quickly destroy even the best high-frequency drivers. That's why JBL JRX100 speakers include SonicGuard™ protection. SonicGuard circuitry absorbs excess energy without interrupting the performance. No circuit breakers to reset, no fuses to replace and no "poly-switches" to degrade sound quality.

	Dual 15" speaker systems have become one of the most popular configurations with DJs and musicians who are looking for more low-frequency performance while maintaining the simplicity of a single-box system. The JRX125 is actually a "quasi three-way" design. This means that the upper woofer covers lows and mids. The bottom woofer uses a lower crossover frequency and covers only lows, acting as a built-in subwoofer. So you get the extra low-end of a dual 15" rig while maintaining the superior mid-frequency performance of a single driver system.

	Features: - Frequency Range (-10 dB): 36 Hz - 16 kHz - Frequency Response (±3 dB): 45 Hz - 12 kHz - Sensitivity (1w/1m): 100 dB SPL - Nominal Impedance: 4 ohms - Power Capacity: 500 watts - Peak Power Capacity: 2000 watts - Recommended Amplifier Power: 500 watts to 1000 watts into 4 ohms - Maximum SPL: 133 dB - Nominal Dispersion: 90º x 50º - Crossover Frequency: 2 kHz - Dimensions (H x W x D): 1099 mm x 464 mm x 432 mm (43.25 in x 18.25 in x 17 in)

hk audio PRO12A
600-watt 12"/1" amp enclosure.
Contain a speaker Output for Extension Cabinet and mic and Line Input.

(sold by unit)

In stock : shipped within 24/48h

693€

turbosound NUQ-12
A series of portable sound reinforcement products offering unbeatable audio performance, advanced features and excellent long term dependability, designed for the most discerning DJ, performing musician and audio systems contractor.

(sold by one)