![]() |
The NuQ-15 loudspeaker is designed to work in conjunction with a Turbosound LMS Series loudspeaker management system and Turbosound T series amplifiers. This combination provides the optimum performance from the system as well as offering considerable flexibility to readily adapt to varying venue requirements. NuQ systems can also be controlled over a BVNetnetwork using TurboDrive™ control software. |
![]() |
The switchable active/passive NuQ-12 loudspeaker consists of a front loaded 12” neodymium low frequency driver and a 1.4” neodymium high frequency compression driver on a rotatable 80°H x 50°V HF Converging Elliptical Waveguide™, matched with an internal passive crossover network in a reflex-loaded enclosure. Bi-amp mode can be enabled by means of a rear panel switch. |
![]() |
Features: - Fequency response: 50Hz - 20kHz (±4dB) - Nominal impedance: 8 ohms - Sensitivity: 100dB SPL - Power handling: 600W RMS, 1200W program - Maximum SPL: 129dB continous, 135dB peak - Components: 1 x 15” (381mm) LF driver, 1 x 1.4” (35mm) HF driver on a Converging Elliptical Waveguide™ - Connectors: (2) Speakon NL4MP, wired pin1+: positive, pin1-: negative, pins 2+ and 2- - Sizes: 712mm x 430mm x 385mm (28” x 16.9” x 15.2”) - Weight: 26kg (57.2lbs) |
![]() |
|











