Yorkville - Nx55 P : speakers > active speakers

Free shipping (France, Belgium)

The new NX55P active speaker enclosure uses a combination of amplifier technologies to create the best combination of lightweight enclosure and high quality sound. Capitalizing on the already popular NX35’s molded cabinet technology, totally new switching power supply amplification and neodymium drivers, the 550 watt bi-amped NX55P weighs in at only 47 lbs (21.4kg) ... the lightest in its class by a long shot.

(sold by one)

	Like all NX series enclosures,the NX55P is manufactured using tough, light weight low resonance variable density composite materials. In addition they are UV and moisture resistant. The NX55P enclosure itself has been molded for maximum versatility. The trapezoid box is ideal for mounting in arrays, or for use as a monitor. An improved wedge monitor angle has been incorporated into the new design.

	The horn amplifier uses a two-tier class H linear technology, allowing the horn to produce loud clean transients to keep up with the high output of the woofer. The two-tier amplifier technology is a lower weight, more efficient amplifier with higher headroom and lower operating temperature. It is a perfect solution for powering the top end.

	A newly designed switching amplifier drives the bottom end or woofer in the NX55P. The woofer or low frequency amplifier uses Class D switching technology to reduce overall weight of the amplifier section. This technology is similar to the power supply found in the new Yorkville A4.4 power amplifier, the EF500P active enclosure and new MicroMix M8 powered mixer.

	The NX55P has a versatile direct input system and built-in mixer. The mixer allows the loudspeaker to be used directly with a microphone and / or line source. The loop output allows additional active cabinets to be driven from one cabinet’s mixer stage, or a series of cabinets to be driven from one source. If desired, the end user can combine multiple NX55P’s using the mixer inputs on each cabinet and coupling the loop outputs. In this simple example you would have the ideal presentation system with two microphone inputs, two line inputs.

	Features: - Dual purpose full range and wedge monitor format enclosure - Ultra-clear reproduction throughout bandwidth - Lightweight, high efficiency, high tech, 550 Watt Bi-amped power module - Proven TX style processing and component protection - +/- 6dB input trim control for individual cabinet level adjustment - XLR and TRS inputs / outputs for easy connection and looping - Multi-input source mixer for direct inputs - Direct microphone input with level control - Two-way overall EQ controls - Light-weight 12" Neodymium Woofer - High quality 1" High Frequency driver - Next generation woofer / driver / horn technology - Integrated flying hardware (1/4" threaded holes) - Tough, full length metal grille - Recessed Mixer panel

	Specifications: - System Type: 2-Way - Active - Program Power (Watts): 550 - Biampable: Self Powered - Biamp Operation Only Yes - Max SPL (dB): 125 - Frequency Response (Hz +/- 3db): 45 - 18k - Crossover Frequency (Hz): 2k - Driver Configuration: 12 inch / 1 inch - HF Driver(s): 1.4-inch Aluminum with Neodymium Driver / 1-inch exit - HF Program Power (Watts): 100 - HF Dispersion (°H x °V): 80 x 50 - HF Protection Thermal / Peak Limiter - LF Driver(s): 12 inch Neodymium Magnet 3 inch voicecoil - LF Program Power(Watts): 450 - LF Protection Thermal / Overcurrent - Total Power (Watts): 550 - HF Power Amplifier (Watts): 100 - HF Amplifier Type: Two Tier Class H - LF Power Amplifier (Watts): 450 - LF Amplifier Type: Class D - Power Cable - Power Switch - Power Consumption (typ/max): 60Hz 2.0A / 50Hz 1,0A - Inputs: 7 - Inputs - 1/4" Jacks 2 (line input) 2 (link in/out) - Inputs - XLR: 1 (mic) 2 (line in/out) - Input Sensitivity (Vrms Sine) +4dBv / 1.23V - Mixer Controls: Mixer on/off switch - Mic Gain - Line/CD Gain - Treble/Bass Tweak - Level Controls: +/- 6dB Main Volume - EQ Controls: 100Hz HP Filter (LF Rolloff) - Limiter: Yes - LED Indicators: Power/Clip/Limit - Feet - Flying Hardware: 1/4-20 x 5 - 2 (Top), 2 (Bottom), 1 (Pullback) - Optional Flying Hardware: NXF Flyware - Bar Handles: 1 (Side) - Pole Mount Adapter (1 3/8"-3.5cm): Yes - Enclosure Materials: Molded Polypropylene - Grille: Perforated Metal - Covering / Finish: Black - Dimensions (DWH xbackW, inches):12.25 x 13.5 x 26.25 x 8.5 - Dimensions (DWH xbackW, cm): 31 x 34.25 x 66.5 x 21.5 - Weight (lbs/kg): 41.9 / 19

	Owner's manual PDF

samson audio DB500A
Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Neodymium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of Class H power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL.